Embedded Stand-alone Fingerprint Identification Module (FIModuleX)
Verification (One-To-One) and Identification (One-To-Few)
Onboard Template Data Storage
Simple Serial RS-232C/CMOS Interface
Downloading/Uploading Template from/to Host
Easy to integrate giving minimal Time-To-Market
Fingerprint-based DOOR-LOCK SYSTEM
Fingerprint-based MACHINE CONTROL
Fingerprint-based CAR LOCK
Fingerprint-based SAFE
Fingerprint-based FURNITURE
Matching OK
Enrolled Fingerprints
1:Few Mode
<1.2
50
<0.0001%
<0.1 %
Identification (1:Few Mode)
Verification (1:1Mode)
Feature Collection Mode, FCMode 3 Times =>1 Feature data / 1 user
Feature Exclusive Mode, FEMode n times(normally n = 5)
¢¡ n feature data/1 user
32Kbytes EEPROM
FCMode - 50
FEMode
- 10 (if ET = 5)
512 Bytes (=480 Bytes Template Data + 32 Bytes Header Data)
400ms (POWER ON State)
Z32H, 32bit RISC with FLASH and EEPROM
FIMX-OPT
FS11(P)/FS20, CMOS CIF Image Sensor
FIMX-OPT - 45x 26 x 6.6 - <7gr
FS11(P) - 20.5 x 25 x 55mm - <40gr
FS20 - 20.5 x 25 x 42mm - <32gr
18.8 x 16mm
500 DPI
5V DC
Stand by-55mA/ Sensing-<140mA (<420ms)
Extraction & Matching-<145mA (<750ms)/PowerDisable-<5uA
0 ¡É ~ 70¡É / 15% ~ 80%
7Pin Connector : RS232C Level UART or CMOS Level UART
SELECT :::
IZZIX FM/FD1000
IZZIX CB1000
IZZIX DuoPASS
IZZIX FD2000
IZZIX FD4000
IZZIX Secure
IZZIX Pass
Fingerex
Fingerex-SD
IZZIX Secure Pro
FIModule