Embedded Stand-alone Fingerprint Identification Module (FIModuleX)
Verification (One-To-One) and Identification (One-To-Few)
Onboard Template Data Storage
Simple Serial RS-232C/CMOS Interface
Downloading/Uploading Template from/to Host
Easy to integrate giving minimal Time-To-Market
Fingerprint-based DOOR-LOCK SYSTEM
Fingerprint-based MACHINE CONTROL
Fingerprint-based CAR LOCK
Fingerprint-based SAFE
Fingerprint-based FURNITURE
Matching OK
Enrolled Fingerprints
1:Few Mode
<0.95
50
<0.0001%
<0.1 %
Identification (1:Few Mode)
Verification (1:1Mode)
Feature Collection Mode, FCMode 3 Times =>1 Feature data / 1 user
Feature Exclusive Mode, FEMode n times(normally n = 5)
¢¡ n feature data/1 user
32Kbytes EEPROM
FCMode - 50
FEMode
- 10 (if ET = 5)
512 Bytes (=480 Bytes Template Data + 32 Bytes Header Data)
400ms (POWER ON State)
Z32H, 32bit RISC with FLASH and EEPROM
FIMX-SIL-MS1
MS1(MBF200, FUJITSU) Solid State Fingerprint Sensor
FIMX-TCH - 45x 26 x 6.6 - <6gr
M
S1 - 24 x 26 x 1.4mm - <6gr
12.8 x 15mm
500 DPI
5V DC
Stand by-65mA/ Sensing-143mA (<160ms)
Extraction & Matching-148mA (<790ms)/PowerDisable-<5uA
0 ¡É ~ 70¡É / 15% ~ 80%
7Pin Connector : RS232C Level UART or CMOS Level URT
SELECT :::
IZZIX FM/FD1000
IZZIX FD2000
IZZIX FD4000
IZZIX CB1000
DuoPASS
FIModule
IZZIX Pass
IZZIX Secure
IZZIX Secure Pro
Fingerex
Fingerex-SD